littmann stethoscope replacement parts | etrailer.com (2025)

Replaces the lithium-ion battery on your Solera 18V RV awning.Features: Replaces the lithium-ion battery on your Solera 18V electric RV awning Battery voltage: 18.5V Specs: Battery dimensions: 10-1/4" long x 1-3/16" wide x 1/2" thick Wire length

• RV Awnings
• Batteries
• Lippert

Specially designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank (RVLG-HDL) and motor (LC142178) sold separately. Retracted height is 32-3/4". Extended height is 53-1/4".

• 5th Wheel Camper
• Landing Gear
• Manual Jack
• etrailer
• Weld-On
• 2 Jacks
• Steel
• 7001 - 8000 lbs

Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K. operation. Large, rectangular, pivoting footpads are included, but you can use larger, 9-inch-diameter pads (LG-210475 - sold separately) instead if you often camp on soft ground. This system and its parts

• 5th Wheel Camper
• Landing Gear
• Electric Jack
• Stromberg Carlson
• Weld-On
• 2 Jacks
• Steel
• 6001 - 7000 lbs

Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K., rectangular, pivoting footpads are included, but you can use larger, 9-inch-diameter pads (LG-210475 - sold separately) instead if you often camp on soft ground. This system and its parts were designed to be

• 5th Wheel Camper
• Landing Gear
• Electric Jack
• Stromberg Carlson
• Weld-On
• 2 Jacks
• Steel
• 6001 - 7000 lbs

Ideal for multiple agricultural and commercial applications, this standard A-frame jack features a 10-13/16" retracted height and measures 10-11/16" from the mounting bracket to the top, excluding the handle. Base sold separately.Features: Dependable jack is recognized as industry standard for agricultural and commercial applications ASABE compliant Precision-fitted parts provide exceptional stability and reliability

• Enclosed Trailer
• Utility Trailer
• Car Hauler
• A-Frame Jack
• Manual Jack
• Bulldog
• Bolt-On
• Weld-On
• No Wheel or Foot
• Standard Grade
• 4001 - 5000 lbs

Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar. Fits 1-3/4" to 2-1/2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application

• Roof Rack
• Mounting Hardware
• Brackets
• Exposed Racks

Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar. Fits 1-1/4" to 2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application

• Roof Rack
• Mounting Hardware
• Brackets
• Exposed Racks

Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar. Sits 2" above rails. Requires Part B bracket (not included).Features: Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar Requires Part B bracket (not included) Made in the USA Specs: Quantity: 2 brackets Height above rails: 2"

• Roof Rack
• Mounting Hardware
• Brackets
• Exposed Racks

Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar. Sits 1" above rails. Requires Part B bracket (not included).Features: Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar Requires Part B bracket (not included) Made in the USA Specs: Quantity: 2 brackets Height above rails: 1"

• Roof Rack
• Mounting Hardware
• Brackets
• Exposed Racks

Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar. Fits 1-1/4" to 2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application

• Roof Rack
• Mounting Hardware
• Brackets
• Exposed Racks

Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar. Fits 3/4" to 1-1/2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application

• Roof Rack
• Mounting Hardware
• Brackets
• Exposed Racks

Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar. Fits 3/4" to 1-1/2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application: 3/4&quot

• Roof Rack
• Mounting Hardware
• Brackets
• Exposed Racks

Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar. Fits 1-3/4" to 2-1/2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application

• Roof Rack
• Mounting Hardware
• Brackets
• Exposed Racks

Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar. Sits 3/8" above rails. Requires Part B bracket (not included).Features: Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar Requires Part B bracket (not included) Made in the USA Specs: Quantity: 2 brackets Height above rails: 3/8"

• Roof Rack
• Mounting Hardware
• Brackets
• Exposed Racks

This A-frame jack has a retracted height of 7-1/8" and an extended height of 22-3/8". The drop leg offers 13-1/2" of lift on top of 15-1/4" of screw travel. Includes a sidewind handle and footplate.

• Utility Trailer
• Enclosed Trailer
• A-Frame Jack
• Manual Jack
• etrailer
• Bolt-On
• With Rectangle Foot
• Standard Grade
• 2001 - 3000 lbs

Just pull the easy-to-access pin on this jack to drop the entire jack tube down for quick, easy adjustment. No drop leg needed. Seven height settings offer up to 12" of drop. Topwind handle allows for an additional 15-1/2" of screw travel.

• Utility Trailer
• A-Frame Jack
• Manual Jack
• Ultimate Jack
• Weld-On
• Bolt-On
• With Rectangle Foot
• Standard Grade
• 1001 - 2000 lbs

Fight back against winding roads and strong wind gusts that cause your trailer to get squirrelly. This system evenly spreads out your tongue weight for a smoother ride. Included deep-drop shank is designed for lifted trucks.

• WD With Sway Control
• Some Sway
• Electric Brake Compatible
• Reese
• 700 lbs
• 600 lbs
• 500 lbs
• Includes Shank

The rigid brackets in this weight distribution hitch provide steel-on-steel friction to help keep your trailer in line. Ultimately, this helps to correct sway for a smooth ride. Adjustable shank and 2-5/16" hitch ball included.

• WD With Sway Control
• Some Sway
• Surge Brake Compatible
• Electric Brake Compatible
• Blue Ox
• Allows Backing Up
• 1100 lbs
• 1000 lbs
• 900 lbs
• Includes Shank

Fight back against winding roads and strong wind gusts that cause your trailer to get squirrelly. This system evenly spreads out your tongue weight for a smoother ride. Adjustable shank included.

• WD With Sway Control
• Some Sway
• Electric Brake Compatible
• Surge Brake Compatible
• Fastway
• Allows Backing Up
• 600 lbs
• 700 lbs
• Includes Shank

Manual landing gear lets you jack up your fifth-wheel trailer quickly and easily. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity of set is 8,000 lbs. (LG-210475 - sold separately) instead if you often camp on soft ground. This system and its parts were designed to be compatible with most of the other fifth-wheel landing gear on the market, including Atwood

• 5th Wheel Camper
• Landing Gear
• Manual Jack
• Stromberg Carlson
• Weld-On
• 2 Jacks
• Steel
• 7001 - 8000 lbs

Swing-up boat trailer jack is perfect for your small Jon boat or jet ski trailer. 8" Caster swivels 360 degrees to make it to easy to maneuver your trailer. Rust-resistant premium finish is 6 times stronger than traditional zinc.

• Boat Trailer
• Utility Trailer
• Side Mount Jack
• Swivel Jack
• Manual Jack
• Fulton
• Bolt-On
• With Wheel
• Marine Grade
• 1001 - 2000 lbs

This heavy-duty 2-bike rack is perfect for carrying electric bikes and bikes with carbon frames or custom paint jobs. Integrated wheels let you roll the rack, so you don't have to carry it to your vehicle. Tilts with bikes loaded.; Maximum wheelbase: 50-1/2" Wheel diameter: 20" - 29" Distance between bikes: 12-1/2" Distance from center of hitch pin hole to: Closest part of rack when folded down: 7" Closest

• Platform Rack
• Tilt-Away Rack
• 2 Bikes
• Thule
• Fits 1-1/4 Inch Hitch
• Fat Tire Bikes
• Carbon Fiber Bikes
• Electric Bikes
• Heavy Bikes
• Wheel Mount
• Bike and Hitch Lock

Power Stabilizer Jacks are an affordable way to upgrade to power stabilizing and easily bolt-on to your existing frame. New motor is 2-times faster than previous versions. Durable steel construction with a powder coat finish to resist corrosion.

• Travel Trailer
• RV Motorhome
• 5th Wheel Camper
• Pop Up Camper
• Teardrop Camper
• Stabilizer Jacks
• Electric Jack
• Lippert
• Bolt-On
• 1 Jack
• Powder-Coated Steel

If your Thule Time Travel Series cargo box needs a tune-up, pick up a new master parts bag. Kit includes 4 EasySnap housings, 4 rubber gaskets, 4 U-bolts and 1 sheet of vinyl hole covers for complete ...
box Direct replacement for Thule Cascade and Evolution cargo boxes originally equipped with Quick Snap hardware Dimensions of U-bolt: 3-1/4" wide x 3" long x 1/4" diameter

• Roof Box
• Mounting Hardware
• Thule